Why Does My Garage Door Jerk When Opening? 8 Important Reasons You Need To Know!

Do you have a garage door at your home? A garage door is more difficult to operate than a standard front door. It contains a lot of complex mechanisms and materials. Even if a small part is damaged then the garage doors start to jerk.

Now, the question is why does your garage door jerk when opening? Well, your garage door may jerk because of various reasons. The garage door may jerk while opening and closing, reversing, or others. All this jerking can be because of some simple issues. Your door can jerk when there is some dust or rust attracted to the door track, spring or cable damage, photo-eye alignment, blockage in the track system, garage door opener problem, or even hardware problem. 

In this article, I will be discussing the basic reasons behind garage door jerking. If you want to know why your garage door is jerking then do read this article.

Garage Door Jerks When Opening

Why Does Your Garage Door Jerk?

If we talk about garage doors then we should know about the three main parts of garage doors. The garage door opener, the garage door, and the garage door springs are the main components.

A lift motor is used by the garage door opener which operates the chain to go up and down. It is also supported by a track system that keeps it in place during operation. 

Some people say their garage door starts going up the chain then it starts jerking and doors jerk as well or it only jerks but stops. It can be because of dust particles being attached to lift motors or the chain.

Also, there can be some problems with the tracking system. This can be the basic reason but if you feel that there can be some other problem then only an expert can help you. 

#1. Can Your Garage Door Get Damaged From Handling?

Sometimes your garage door can get damaged from handling. If you observe that when your door comes up the garage door opener only gets to halfway and starts binding then the problem may be with the track.

Damage to the track is generally found in the form of crimps or bends. You can try repairing it with a hammer or mallet if the problem is minor or else call a repair.

Another common problem is that the garage door opener opens up to 10 inches or more and then stops forcefully jerking the arm. It can be because there may be some dust or rust in the chain or chain hoist or the track.

If you face this problem then be sure to check the track and the chain and also remove the dirt with the necessary tools.

#2. Can Your Garage Door Get Jerked For Hardware Issues?

Your garage door may get jerked for hardware issues as well. The garage door jerks or its trolley wear pads jerks and stops sliding carriage which can be because of the hardware issue.

The hardware of a garage door is mainly screws, hinges, and wall mounts and these are the parts we should be checked if this type of problem occurs.

The garage door may jerk and stop sliding carriage because of a loose screw, damage in the wall or frame. 

If the trolley pads jerks and stops sliding the carriage then maybe the garage door system is not properly grounded. There is also a chance that some parts inside your garage door opener are damaged or there may be some displacement of the trolley wear pad.

It is never a good idea to ignore such types of problems, if you can detect the problem then repair it as soon as possible.

Why Do Automatic Garage Door Jerks When Opening And Closing?

The automatic garage door can also jerk when opening and closing. Many people observe that the automatic garage door jerks while opening or when almost closing.

It can be because of that technical glitch or some problem with the sensor. Moreover, it can be because of some issues with the remote control as well.

#3. Why Does Your Automatic Garage Door Jerk When Opening?

There can be some basic problems with the automatic garage door while opening. If your automatic garage door on the electrical garage door jerks when opening then there may be a problem with the sensor, cable, rollers, or bottom fixture as well.

Most of the time the problem is visible but if you cannot detect the damage then you should definitely contact an expert repair. 

The electrical garage door also jerks on opening or when opened. If you face this problem then you need to first check the rollers and cable.

From time to time the rollers can need oiling or dust cleaning. If the cable is damaged then you need to change it as soon as possible.

At times, there can be a problem with the motor. You should take the help of a repairman if you cannot identify the issue. 

#4. Why Does Your Automatic Garage Door Jerk When Closing?

You can face this jerking issue even while closing the automatic garage door. It is seen there most of the time there are dust particles in the bottom fixture which can resist the door from closing.

This may be the cause when the door is almost closing. There can be some other problems as well such as damage in the cable or rollers, problem in the motor, and opener carriage issue as well.

If you observe that the automatic garage door is jerking while closing then you should first check the cable, rollers, and the bottom fixture for any dust or rust needed to be cleaned.

In case of severe problems, you should call for repair. I never recommend ignoring the problem with your automatic garage door. 

#5. Why Does Your Garage Door Opener Jerk Back And Forth While Opening?

A garage door opener mainly uses an electric motor to operate. The motor is attached to a chain, belt, or rod. When you see the garage door opener jerking harder while opening then there must be some problem with the motor.

The chain, belt, or rod inside it might be damaged. At times, it can cause if the springs are rusted or some dirt is inside the motor. Many other reasons can be there. It is better to get it checked.

Let’s say your garage door opener drive mechanism is jerking then there might be a problem with the electrical motor inside the opener.

If you see your garage door opener jerks and does not open then the problem can be with the springs inside the opener. Your garage door’s springs are most likely centered, or above the door.

When the door is lowered, the coiled spring is under a lot of strain. It pulls on rollers that are attached to the bottom of your door by a wire coil. It might be difficult or impossible to lift the door if the springs wear out, get damaged, or break.

They can make it difficult for your opener to lift simply by wearing out, causing it to jerk. 

If a garage door opener lets door drop-in jerking motion, then the difficulty is with the chain, manufacturing sensor, or rust or dust in the track as well.

Cleaning might help to stop the jerking. If you feel that the garage door opener is kind of jerking then first try to clean it because sometimes the problem is that the chain or the tracks are dirty.

Also, you should check the springs if they are rusty then it is better to change them. 

Read More: Why Does My Garage Door Slam Shut?

#6. Why Does Your Garage Door Not Come Up And Down Smoothly?

The garage door can jerk up and down because of many reasons.

Some of the common reasons might be the batteries of the transmitter are damaged, the photo-eye out of line, the track is aligned, broken springs, and others. 

Why Does My Garage Door Not Come Up Smoothly?

Open the garage door doesn’t come up smoothly instead it jerks up or comes upward when opened.

It happens because are reverse mechanism is included in garage doors to prevent them from clashing things in their path, if there is any object in the pathway then the door automatically goes upward.

A build-up of debris on the tracks may also be the reason. If the garage door strikes even a little object on the track, then it jerks and goes upward to prevent clashing. 

Now you can ask me why is my sears garage door opener goes up all herky-jerky? Well, it occurs because pen the batteries of the transmitter are dead or are slowly getting damaged.

Also, some other reasons might be there. If there is any particle in the track then also it can jerk while going up. When the batteries are losing their power then it becomes difficult for the door opener to open and close its doors which can be the main reason for this. 

Why Does My Garage Door Not Come Down Smoothly?

From time to time you can face some trouble with your garage door even while closing it. Sometimes the garage door does not come out smoothly while going downward.

One question that can arise here is that the garage door jerks on one side when almost down. It occurs when an object is in the track of the door from one side or if the spring of one side is damaged.

However, garage doors can jerk while coming down or while going down springs which is because of the spring damage. If you see this type of problem then the tension springs or the cable might be broken. Your garage door may close very fast if these tension springs or cables break, usually with a loud crash when it hits the ground.

It is also seen that the garage door goes down herky-jerky or the bottom rollers on one side of the garage door jerk on the way down.

It can be caused because of the sensor mechanism problem, spring or cable damage, or dust particles in the track. These problems should never be avoided.

Read Also: What Garage Door Openers Are Compatible With Craftsman?

#7. Why Does Your Garage Door Get Stuck Then Jerk When Opening?

Sometimes it is also seen that the garage door gets stuck then jerks while opening. This problem commonly occurs due to some damage in the cable, track blockage, or sensor mechanism problem.

A garage door can get stuck because of spring damage or rust in the track. You can use lubricant or use cleaning to solve the issue.

If you feel the problem is much more serious and take the advice of an expert or repair the garage door.

However, you should never ignore the garage door problem because it can get worse.

#8. Why Does Your Garage Door Be Jerky When Closing?

The garage door is often found to be jerky while closing the door. It is a common problem. Once in a while, the garage door jerks and pops loudly when closing, it is because the tension springs are broken.

Open when the tension spring breaks down, your garage door may close very quickly and also pop with the bang while closing the door.

I have also observed that the garage door jerks and goes in reverse when it is closing. This difficulty is because when there is any dust particle in the track then because of the reverse mechanism the door automatically goes up and doesn’t want to close. This can be very much dangerous for your garage door. 

Furthermore, It is seen that the garage door sometimes jerks but closes smoothly or it opens okay but closes jerky. This can be because of the rust in the track or some damage to the cable or rollers.

Generally, this problem can be solved by using lubricant. These are the basic reasons but only a professional could help you to tell you the actual reason. 

Can You Fix A Jerky Garage Door At Home? Or DIY?

Yes. You can fix a jerky garage door at home but only if you know the correct reason behind the jerky door. Sometimes lubrication, cleaning, and a little maintenance can help you to get rid of a jerky garage door.

The garage door opener can be fixed if you can open the garage door opener and locate the problem then try to fix it. 

But what if there is a major problem inside the garage door opener? Then it can only be fixed by a professional. However, some simple problems can be solved at home but not serious problems.

Read More: Can I Change My Double Garage Doors To A Single?

3-IN-ONE Professional Garage Door Lubricant

While searching for the best product, I came across this amazing product that will prevent your garage door from jerking. It is mostly recommended by the users. People who use this product are very much satisfied.

There are over 450 global reviews for this product. Many customers use this lubricant because it works efficiently and it reduces overspray.

According to one user, the dosing tube folds up for storage and makes it unlikely to be misplaced. Also, users love the WD40 scent that comes from the product. 

I have found that using this lubricant for 6 to 12 months can help reduce garage door jerking. A couple of users advise spraying the entire track first and then each wheel and hinge separately.

Lastly, move the door up and down a few times to get quick results. 

Over To You

Do you think the reason in this article is helpful for you?

These are some basic common reasons for garage door jerking. If you are facing any of these problems then please contact a professional.

Let me know if you have any other queries.

Similar Posts

Leave a Reply